13
Installing Door Handles
Door Handle
Mounting
Instructions
1 Remove handles from
protective packaging.
2 Position fresh food
handle end caps (A) over
upper and lower pre-
installed shoulder bolts
(B) that are fastened
into door, ensuring the
holes for the set screws
are facing towards the
opposite door.
3 While holding handle
firmly against door,
fasten upper and lower
Allen set screws (C) with
supplied Allen wrench.
4 Repeat steps 2 and 3 to
install opposite handle.
Ensure the holes for the
set screws are facing
towards the first door.
5 Position freezer handle
end caps over left
and right pre-installed
shoulder bolts that are
fastened to the drawer,
ensuring the holes for
the set screws are facing
down.
6 While holding handle
firmly against drawer,
fasten left and right
Allen set screws (C) with
supplied Allen wrench.
End
Cap
End
Cap
End
Cap
End
Cap
Mounting Refrigerator Handles
End
Cap
End
Cap
Mounting Freezer Handle
NOTE
To ensure that handles are flush with doors/drawer, make sure that set screws are completely
tightened.
CAUTION
Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.