40
Care and Cleaning
Replacing LED Lights
(select models)
Both the freezer and fresh food compartments
of your refrigerator include LED lights. Always
use Electrolux parts for replacement.
To replace LED Lights:
1 Unplug your refrigerator’s power cord.
2 Remove light cover by pushing up and out.
3 Hold the LED cover with one hand and
pull the connector with the other hand
while pressing the connector latch.
4 Replace LED light and snap in place
assuring the light is facing in toward the
unit (inside fresh food and freezer) or facing
outward on bottom of fresh food doors.
LED Light Harness Removal
LED Light Removal
NOTE
LED lights are in series so if one is bad or
unplugged, several lights may not light up.
Replacing Light Bulbs
(select models)
Both the freezer and fresh food compartments
of your refrigerator include incandescent light
bulbs that will need replacing from time-to-
time. Some lights have covers that need to be
removed before replacing the bulbs. Always use
bulbs that are designed for appliance lighting.
CAUTION
Wear gloves when replacing incandescent
light bulbs to avoid getting cut.
To replace light bulbs:
1 Unplug your refrigerator’s power cord.
2 Wear protective gloves.
3 Remove light cover, if necessary.
4 Unscrew and replace old bulb with an
appliance bulb of the same type and
wattage (normally 40 watts).
5 Replace light cover, if necessary.
6 Plug in the refrigerator’s power cord.
Light
Bulb
Light Sockets
Located Behind
Glass Shelves
Light
Bulb
Refigerator
Light Cover
Refrigerator Light