38
sabbath featuRe
(continued)
Oven Controls
Note:
you may change the oven temperature once baking has started. Press
UPPER OVEN
UPPER
OVEN
,
BAKE
, the numeric key pads for the temperature you want (example for 425°F press
4
,
2
,
5
) and then press
START
TWICE
(for Jewish Holidays only). Remember
that
the oven control will no longer beep or display any further changes
once the oven
is set for the Sabbath feature.
8. The oven may be turned OFF at any time by pressing
CANCEL
pad (this will turn the
oven OFF only). To turn OFF the Sabbath feature press and hold both the
HI
+
hi
and
LO
-
lo
pads for at least 3 seconds.
SAb
will disappear from the display.
Should you experience a power failure or interruption, the oven will shut off. When power is
returned the oven will not turn back on automatically.
SF
(Sabbath Failure) will be displayed
in the oven control display and the surface element displays. The oven will remember that
it is set for the Sabbath and the food may be safely removed from the oven while still in the
Sabbath feature, however the oven cannot be turned back on until after the Sabbath. After the
Sabbath observance turn OFF the Sabbath feature. Press and hold both the
HI
+
hi
and
LO
-
lo
pads for at least 3 seconds.
SAb
will disappear from the display and the oven may be used
with all normal functions. For further assistance, guidelines for proper usage, and a complete
list of models with the Sabbath feature, please visit the web at
http:\\www.star-k.org.
Notes for the use of the cooktop in Sabbath mode:
•
When the Sabbath feature is enabled on the oven control, it is also enabled on the cooktop.
To activate the Sabbath feature, it is not necessary to have one burner ON, but it is necessary
to have a Bake function active in the oven.
•
When the Sabbath feature is enabled, a surface element can be turned ON by pressing
the ON/OFF pad. The element will turn ON 15 to 30 seconds after the ON/OFF pad was
pressed. Double elements will turn on with inner element ON only.
•
When the Sabbath feature is enabled, the power level of an
active
element can be changed.
The change will take effect after a 15 to 30 seconds delay. The element size (inner/outer)
CANNOT be changed. Elements will remain with the same size selection they had before
entering Sabbath mode.
•
All surface element displays will show indicator lights (see Fig. 1).
Fig. 1