4
30" ELECTRIC SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
1 1/8"
(2,86 cm)
FRONT OF
CABINET
F
Ref.
22 7/8"(58,1 cm) min.
23 1/4"(59,05 cm) max.
(see Note 4)
IMPORTANT:
Cabinet and countertop
width should match the cutout width.
***IMPORTANT: To avoid cooktop breakage for cutout width (E dimension) of more than 30 1/16" (76,4
cm), make sure the appliance is centered in the counter opening while pushing into it. Raise leveling
legs and the rear adjustable wheels at a higher position than the cabinet height (see page 5), insert
the appliance in the counter and then level. Make sure the unit is supported by the leveling legs at the
front and the wheels at the back and NOT by the cooktop itself.
Cabinet Dimensions
E
E
E
.
CUTOUT WIDTH
(Countertop and cabinet)***
F
.
CUTOUT DEPTH
G
.
HEIGHT
OF COUNTERTOP
30±1/16"
(76,2±0,15 cm)
21 3/4" (55,2 cm) Min.
22 1/8" (56,2 cm) Max
24" (61 cm) Min. with backguard
35 7/8" (91,1 cm) Min.
36 5/8" (93 cm) Max.
G
E
½”
min.
3/8”
min.
½”
min.
13/16
”
min.
4 1/4
”
min.
1/8
”
min.
1 5/8
”
min.
Shave Raised
Edge To Clear
Space for
31 1/2"
(80 cm)
Wide
Cooktop Rim.
Shaded
area shall
be clear
of any
openable
panel or
drawer.
Grounded Junction Box or Wall Outlet Should Be
Located 8" to 17" (20,3 - 43,2 cm) From Right
Cabinet and 2" to 4" (5,1-10,2 cm) From Floor
24" Min.
(61 cm) Min.
30" Min.
(76,2 cm) Min.
13"
(33 cm)
Locate Cabinet Doors 1" (2,5 cm)
Min. From Cutout Opening
Approx. 1 7/8"
(4,8 cm)
18" Min.
(45,7 cm) Min.
30" Min. (see Note 3)
(76,2 cm) Min. (See Note 3)
1 ½" Max.
(3,8 cm Max.)
Countertop
hatched surfaces
should be flat &
leveled.
