32" Built-In All-Freezer Specifications
•
Product Weight – 237 Lbs.
•
An electrical supply with grounded three-prong receptacle is
required. The power supply circuit must be installed in accordance
with current edition of
National Electrical Code (NFPA 70)
and
local codes & ordinances.
•
Voltage Rating – 120V / 60 Hz/20 Amps
•
Connected Load (kW Rating) @ 115 Volts = 0.55 kW
•
Amps @ 115 Volts = 5 Amps
•
Always consult local and national electric & plumbing codes.
•
Water line for ice maker can enter opening through floor or rear wall. Copper tubing
recommended between cold water line and water connection location. Water line
tubing recommended is 48" minimum length by 1/4" diameter. Installation of easily
accessible shutoff valve
in water line required.
•
Minimum 25-1/4" depth requires recessed electrical outlet and
copper water line.
•
To allow for ease of installation, tape excess power cord to back of unit.
•
To allow for ease of moving out side-by-side units after installation,
84" minimum length of coiled copper tubing recommended.
•
When installing freezer adjacent to wall, cabinet or other appliance
that extends beyond front edge of unit, 20" minimum clearance recommended to
allow for optimum 140° door swing, providing complete drawer / crisper access and
removal.
(Absolute 4" minimum clearance will ONLY allow for 90°door swing which
will provide limited drawer /crisper
access with restricted removal.)
•
Freezer must be placed on level surface of hard material, same height as flooring.
Surface must support approximately 800 lbs. when fully loaded. Unit equipped with
4-point leveling.
“Built-In Look” Specifications
•
Minimum opening of 72"H x 33"W x 25-1/4"D required for single-unit
“Built-In Look” installation; 66"W required for double-unit installation.
(72"H to be measured from finished floor to underside of soffit or
overhead cabinet.)
•
Remove all wall/floor molding prior to built-in installation.
Optional Trim Kit Specifications
•
If optional Single or Double Louvered Trim Kit is to be used, different cutout
dimensions are required. Kit can be adapted to fit either 75" or 79"
opening height. (
Refer to cutout dimensions on this page and detailed
Louvered Trim Kit installation instructions included with kit or on web.
)
•
Remove all wall/floor molding prior to built-in installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.ca for detailed instructions.
Optional Accessories
•
Single Louvered Trim Kit – (PN# TRIMKITSS1).
•
Double Louvered Trim Kit – (PN# TRIMKITSS2).
•
PureAdvantage
®
Air Filter
Replacement Cartridge – (PN# 241754001).
Built-In All Freezer
EI32AF65J S
High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
electroluxappliances.ca
EI32AF65JS 12/10 © 2010 Electrolux Home Products, Inc. Printed in Canada
58043-1_Elux_Counterparts.qxd:Layout 1 11/17/10 9:37 AM Page 4
