Built-In All Refrigerator
EI32AR65J S
High standards of quality at Electrolux Home Products, Inc. mean
we are constantly working to improve our products. We reserve the right
to change specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
electroluxappliances.ca
EI32AR65JS 12/10 © 2010 Electrolux Home Products, Inc. Printed in Canada
32" Built-In All-Refrigerator Specifications
•
Product Weight – 230 Lbs.
•
An electrical supply with grounded three-prong receptacle is
required. The power supply circuit must be installed in accordance
with current edition of
National Electrical Code (NFPA 70)
and
local codes & ordinances.
•
Voltage Rating – 120V / 60 Hz/20 Amps
•
Connected Load (kW Rating) @ 115 Volts = 0.55 kW
•
Amps @ 115 Volts = 5 Amps
•
Always consult local and national electric codes.
•
Minimum 25-1/4" depth requires recessed electrical outlet.
•
To allow for ease of installation, tape excess power cord to back of unit.
•
When installing refrigerator adjacent to wall, cabinet or other appliance
that extends beyond front edge of unit, 20" minimum clearance
recommended to allow for optimum 140° door swing, providing complete
drawer / crisper access and removal.
(Absolute 4" minimum clearance will
ONLY allow for 90°door swing which will provide limited drawer /crisper
access with restricted removal.)
•
Refrigerator must be placed on level surface of hard material, same
height as flooring. Surface must support approximately 800 lbs. when
fully loaded. Unit equipped with 4-point leveling.
“Built-In Look” Specifications
•
Minimum opening of 72"H x 33"W x 25-1/4"D required for single-unit “Built-In
Look” installation; 66"W required for double-unit installation.
(72"H to be measured from finished floor to underside of soffit or overhead
cabinet.)
•
Remove all wall/floor molding prior to built-in installation.
Optional Trim Kit Specifications
•
If optional Single or Double Louvered Trim Kit is to be used, different cutout dimensions
are required. Kit can be adapted to fit either 75" or 79"
opening height. (
Refer to cutout dimensions on this page and detailed Louvered Trim
Kit installation instructions included with kit or on web.
)
•
Remove all wall/floor molding prior to built-in installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxappliances.ca for detailed instructions.
Optional Accessories
•
Single Louvered Trim Kit – (PN# TRIMKITSS1).
•
Double Louvered Trim Kit – (PN# TRIMKITSS2).
•
PureAdvantage
®
Air Filter
Replacement Cartridge – (PN# 241754001).
58043-1_Elux_Counterparts.qxd:Layout 1 11/17/10 9:36 AM Page 2
