background image

CAUTION: The appliance must not be supplied

through an external switching device, such as a timer,

or connected to a circuit that is regularly switched on

and off by a utility.

CAUTION: The cooking process has to be supervised.

A short term cooking process has to be supervised

continuously.

WARNING: Danger of fire: Do not store items on the

cooking surfaces.

Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

Do not use the appliance before installing it in the

built-in structure.

Do not use a steam cleaner to clean the appliance.

After use, switch off the hob element by its control and

do not rely on the pan detector.

If the glass ceramic surface / glass surface is cracked,

switch off the appliance and unplug it from the mains.

In case the appliance is connected to the mains

directly using junction box, remove the fuse to

disconnect the appliance from power supply. In either

case contact the Authorised Service Centre.

If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by

the manufacturer of the appliance in the instructions

for use as suitable or hob guards incorporated in the

appliance. The use of inappropriate guards can cause

accidents.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

WARNING!

Risk of injury or damage to

the appliance.

• Remove all the packaging.

www.electrolux.com

4

Summary of Contents for EIS62341

























Reviews: