Sensor field
Comment
10
To activate and deactivate Hob²Hood.
11
To activate and deactivate Pause.
12
To activate PowerBoost.
13
-
To set a heat setting: 0 - 9.
14
To activate and deactivate PowerSlide.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch for 1 second to activate or
deactivate the hob.
The control panel comes on after you
activate the hob and goes off after you
deactivate the hob.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• you do not place any cookware on the
hob for 50 seconds,
• you do not set the heat setting for 50
seconds after you place the cookware,
• you spill something or put something on
the control panel for more than 10
seconds (a pan, a cloth). When you hear
the acoustic signal, the hob deactivates.
Remove the object or clean the control
panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking zone
cool down before you use the hob again.
• you do not deactivate a cooking zone or
change the heat setting. After some time,
the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
The hob deactivates
after
1 - 2
6 hours
3 - 4
5 hours
5
4 hours
6 - 9
1.5 hours
5.3 Using the cooking zone
CAUTION!
Do not place hot cookware on
the control panel. There is a risk
of damage to the electronic
parts.
Place the cookware in the centre of the
selected zone.
ENGLISH
29
