1
3
2
Fit the doors into the pins and install the
doors. Install the hinge.
On the opposite site, install the hole covers.
Tighten the hinge. Make sure that the
doors are aligned.
Remove and install the handle (if foreseen)
on the opposite side.
Reposition, level the appliance, wait for at
least four hours and then connect it to the
power socket.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natu-
ral fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the
reversibility of the doors at your cost.
ELECTRICAL CONNECTION
Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power sup-
ply.
The appliance must be earthed. The power
supply cable plug is provided with a con-
tact for this purpose. If the domestic power
supply socket is not earthed, connect the
appliance to a separate earth in compli-
ance with current regulations, consulting a
qualified electrician.
The manufacturer declines all responsibility
if the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
ENGLISH
21
Summary of Contents for EJF1800FW
Page 1: ...EJF1800FW EN FRIDGE FREEZER USER MANUAL ...
Page 25: ...ENGLISH 25 ...
Page 26: ...26 www electrolux com ...
Page 27: ...ENGLISH 27 ...
