39
The oven light
NOTE! Before you change the bulb,
turn all the knobs to zero and make
sure that the cooker is
disconnected
from the power supply
. For cookers
with a cable, pull out the plug. For
other cookers, disconnect the power
supply by using the universal pole
switch.
Lay a cloth on the bottom of the oven to
protect both the bulb and the protective
glass.
CHANGING
THE
OVEN
LIGHT
/
CLEANING
THE
PROTECTIVE
GLASS
1
Check that the oven is not hot.
2
Unscrew the protective glass by
turning it to the left and clean it.
(
SEE
ILLUSTRATION
).
3
If necessary:
Replace the oven light with a new
bulb marked 230–240V, 40W, 300°C,
with an E14 base.
4
Re-fit the protective glass.
R
EPLACING
THE
LAMP
BULB
ON
PAGE
C
LEANING
THE
PROTECTIVE
GLASS
1
Check that the oven is not hot.
2
Loosen and remove the oven step
units on the left-hand side (see page
37)
3
Loosen the protective glass with the
aid of a narrow, blunt object (for
example a teaspoon) and clean it.
Hold one hand under the glass so that
it does not fall down onto the bottom
of the oven.
4
If necessary:
Replace the oven lighting and fit a
new bulb with an E14 base, marked
230-240V, 25W and 300°C.
Summary of Contents for EKC60154
