A
A
B
Minimum distances
Dimen-
sion
mm
A
2
B
685
13.3
Levelling
Use small feet on the bottom of appliance
to set same level of cooker top surface
with other surfaces
Problem
Possible cause
Remedy
The appliance does not
operate.
The power plug is not
correctly put in.
Put in the power plug
correctly.
The appliance does not
operate.
The earth fault switch is
switched off.
Switch on the earth fault
switch.
The appliance does not
operate.
The appliance is off.
Switch on the appliance.
The oven does not heat
up.
The necessary settings
are not set.
Control the settings.
The oven lamp does not
operate.
The oven lamp is defec-
tive.
Replace the oven lamp.
Steam and condensation
settle on the food and in
the oven cavity.
You left the dish in the
oven for too long.
Do not leave the dishes in
the oven for longer than
15-20 minutes after the
cooking process ends.
The appliance is off but it
still makes the sounds.
The cooling fan still oper-
ates.
No action needed. This is
normal.
The core temperature
sensor does not work.
You did not install the
core temperature sensor
point correctly in the
meat.
Insert the core tempera-
ture sensor point in the
middle of the meat, as far
as it goes.
The clock display shows
"F11".
The core temperature
sensor has short circuit or
the plug of the core tem-
perature sensor is not
tightly in position in the
socket.
Insert the plug of the core
temperature sensor as far
as it will go into the sock-
et on the side wall of the
oven.
26 www.electrolux.com