Electrolux EKG51105OX, User Manual

2. SAFETY INSTRUCTIONS

This appliance is suitable for the
following markets:  PH

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instruction

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Do not pull the appliance by the

handle.

• The kitchen cabinet and the recess

must have suitable dimensions.

• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is

installed below and adjacent safe

structures.

• Parts of the appliance carry current.

Close the appliance with furniture to

prevent touching the dangerous parts.

• The sides of the appliance must stay

adjacent to appliances or to units with

the same height.

• Do not install the appliance on a

platform.

• Do not install the appliance adjacent

to a door or under a window. This

prevents hot cookware to fall from the

appliance when the door or the

window is opened.

• Make sure to install a stabilizing

means in order to prevent tipping of

the appliance. Refer to Installation

chapter.

2.2 Electrical Connection

WARNING!

Risk of fire and electrical

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Do not let mains cables touch or

come near the appliance door,

especially when the door is hot.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have

an isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation

device must have a contact opening

width of minimum 3 mm.

• Fully close the appliance door, before

you connect the mains plug to the

mains socket.

2.3 Gas connection

• All gas connections should be made

by a qualified person.

• Before installation, make sure that the

local distribution conditions (nature of

the gas and gas pressure) and the

adjustment of the appliance are

compatible.

• Make sure that there is air circulation

around the appliance.

• The information about the gas supply

is on the rating plate.

ENGLISH

5