18
Something not working
SYMPTOM
There is no spark when lighting the gas.
The gas ring burns unevenly.
The oven does not come on.
The oven light does not come on.
It takes too long to finish the dishes, or they are
cooked too fast.
Steam and condensation settle on the food and the
oven cavity.
The oven fan is noisy.
The display shows "12.00".
SOLUTION
Check that the unit is plugged in and the electrical
supply is switched on
Check the mains fuse has not blown
Check the burner cap and crown have been
replaced correctly, e.g. after cleaning.
Check the main jet is not blocked and the burner
crown is clear of food particles.
Check the burner cap and crown have been
replaced correctly, e.g. after cleaning.
Check that a cooking function has been selected.
Check that the oven door is completely closed.
Check that the time of day has ben set (see
chapter "How to set the time of day").
Check that the socket switch or the switch from the
mains supply to the appliance are ON.
Select a function with the oven function control
knob.
Check the light bulb, and replace it if necessary
(see "Oven lamp replacement").
The temperature may need adjusting.
Refer to the contents of this booklet, especially to
the chapter “Using the Oven”.
Leave dishes inside the oven no longer than 15-20
minutes after the cooking is completed.
Check that shelves and bakeware are not vibrating
in contact with the oven back panel.
Set the time of day (see chapter "How to set the
time of day").
If after all these checks, the appliance still does not work, contact your local Service Force Centre.
If the appliance is not working correctly, please carry out the following checks, before contacting your local Service
Centre.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation,
a charge will be made even if the appliance is under guarantee.
