6
FOR EFFICIENCY AND SECURITY OF APPLIANCE, WE RECOMMEND YOU
ALWAYS TO USE THE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR
AUTHORIZED SERVICES WHEN IN CASE OF A NEED.
PART 3 : INSTALLATION AND PREPARATION FOR USE
This modern, functional and practical cooker, that was manufactured with the most
quality parts and materials, will meet your needs in every respect. You must surely
read this manual in order not to have any problem in future and to be able to have
successfull results. The following information are the required rules for right
installation and service processes. It must be read especially by the technician who
will install the appliance.
Contact to Authorized Service for mounting of your cooker.
3.1 ENVIRONMENT WHERE YOUR APPLIANCE WILL BE INSTALLED
Your cooker must be set up and used where there is ventilation.
While operating, this appliance needs 2m3/h air per kw input. There must be a
natural ventilation enough to provide the gas to be used in the environment. The
average air flow must directly come in through the air holes that will be opened on
the walls that are opened towards outside.
These air holes must have at least the cross section of 100cm2 that is
effective for air transition (One or more air holes can be opened.) (Figure1-2)
This hole (or holes) must be opened both from the inside and from the outside
as it/they will never be clogged and preferably must be placed close to the
bottom and at opposite side of the smokes of the burned gases that were
emptied. If it seems not possible to open these ventilations in the place where
