4.5 Temperature indicator
For proper storage of food the
refrigerator is equipped with the
temperature indicator. The symbol on the
side wall of the appliance indicates the
coldest area in the refrigerator.
If OK is displayed (A), put fresh food into
area indicated by symbol, if not (B),
adjust the temperature controller to a
colder setting and wait 12 hours before
checking the temperature indicator
again.
OK
OK
A
B
After putting fresh food into
the appliance or after
opening the door repeatedly
or for a long period, it is
normal for the indicator not
to show OK; wait at least 12
hours before readjusting the
temperature controller.
4.6 MULTIFLOW
The refrigerator compartment is
equipped with a device that allows rapid
cooling of food and keeps a more
uniform temperature in the compartment.
This device activates automatically when
needed, for example when the
temperature inside the appliance is high.
4.7 TASTEGUARD filter
This active carbon filter absorbs bad
odours and maintains the best flavour
and aroma for all the food stored in the
refrigerator compartment.
On delivery the filter is in a plastic bag.
To install the filter in the appliance:
1. Take off the filter cover.
2. Take out the filter from the plastic
bag.
3. Insert the filter in the slot in the rear
wall of the appliance.
4. Put on the filter cover.
CAUTION!
Make sure that the filter
cover is always closed so
that the filter functions
correctly.
To get the best performance the filter
should be changed once every 6 months.
New active filter can be purchased from
your local dealer or through the website.
The part number is printed on the plastic
bag.
5. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
5.1 Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
ENGLISH
9
