16
In the bag of the accessories there are two
spacers which must be fitted in the two top
corners.
Slacken the screws and insert the spacer under the
screw head, the re-tighten the screws.
Levelling the Appliance
When placing the appliance ensure that it stands level.
This can be achieved by two adjustable feet at the
bottom in front.
Do not stand the appliance next to a source of heat
such as a radiator or cooker.
Ventilation Requirements
The appliance must have adequate ventilation to
ensure correct operation.
Diagram shows the ventilation requirements when
installed:
A
Under a cupboard.
B
When freestanding
Door Reversal
Should the location demand it, door-opening direction
can be refitted from right-handed to left-handed.
Appliances are supplied right-handed.
Following operations are to be done on the basis of
figures and explanations:
1. To perform the operations listed below it is
recommended to ask another person for help who
can safely hold the doors while performing the
operations.
2. Disconnect the appliance from the electricity
supply.
3. Open the doors and dismount the double door
hinge (a, b) by removing the screws (2 pieces) (c).
(fig.2)
4. Take off the double door hinge (a, b, c) by
gradually removing it from the cabinet, slightly
tilting both doors. Do not forget to remove the
plastic spacer (b) under the hinge. (fig.2)
fig. 1.
