Electrolux ENN2643AOW, User Manual

5.

If the power plug socket is loose, do
not insert the power plug. There is a
risk of electric shock or fire.

6.

You must not operate the appliance
without the lamp cover (if foreseen)
of interior lighting.

• This appliance is heavy. Care should be

taken when moving it.

• Do not remove nor touch items from the

freezer compartment if your hands are
damp/wet, as this could cause skin
abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appli-

ance to direct sunlight.

• Bulb lamps (if foreseen) used in this ap-

pliance are special purpose lamps selec-
ted for household appliances use only.
They are not suitable for household room
illumination.

DAILY USE

• Do not put hot pot on the plastic parts in

the appliance.

• Do not store flammable gas and liquid in

the appliance, because they may ex-
plode.

• Do not place food products directly

against the air outlet on the rear wall. (If
the appliance is Frost Free)

• Frozen food must not be re-frozen once

it has been thawed out.

• Store pre-packed frozen food in accord-

ance with the frozen food manufacturer's
instructions.

• Appliance's manufacturers storage rec-

ommendations should be strictly ad-
hered to. Refer to relevant instructions.

• Do not place carbonated or fizzy drinks

in the freezer compartment as it creates
pressure on the container, which may
cause it to explode, resulting in damage
to the appliance.

• Ice lollies can cause frost burns if con-

sumed straight from the appliance.

CARE AND CLEANING

• Before maintenance, switch off the appli-

ance and disconnect the mains plug
from the mains socket.

• Do not clean the appliance with metal

objects.

• Do not use sharp objects to remove frost

from the appliance. Use a plastic scra-
per.

• Regularly examine the drain in the refrig-

erator for defrosted water. If necessary,
clean the drain. If the drain is blocked,
water will collect in the bottom of the ap-
pliance.

INSTALLATION

For electrical connection carefully
follow the instructions given in spe-
cific paragraphs.

• Unpack the appliance and check if there

are damages on it. Do not connect the
appliance if it is damaged. Report possi-
ble damages immediately to the place
you bought it. In that case retain pack-
ing.

• It is advisable to wait at least four hours

before connecting the appliance to allow
the oil to flow back in the compressor.

• Adequate air circulation should be

around the appliance, lacking this leads
to overheating. To achieve sufficient ven-
tilation follow the instructions relevant to
installation.

• Wherever possible the back of the prod-

uct should be against a wall to avoid
touching or catching warm parts (com-
pressor, condenser) to prevent possible
burn.

• The appliance must not be located close

to radiators or cookers.

• Make sure that the mains plug is acces-

sible after the installation of the appli-
ance.

• Connect to potable water supply only (If

a water connection is foreseen).

SERVICE

• Any electrical work required to do the

servicing of the appliance should be car-
ried out by a qualified electrician or com-
petent person.

• This product must be serviced by an au-

thorized Service Centre, and only genu-
ine spare parts must be used.

4

www.electrolux.com