Electrolux EOB5450AOX, User Manual

Clock function

Application

TIME DELAY

To combine DURATION and END function.

MINUTE MIND‐

ER

To set countdown time. This function has no effect on

the operation of the appliance.

6.2 Setting and changing the

time

You must set the time before you

operate the oven.

The   flashes when you connect the

appliance to the electrical supply, when

there was a power cut or when the timer

is not set.

Press the   or   to set the correct

time.

After approximately five seconds, the

flashing stops and the display shows the

time of day you set.

To change the time of day press 
again and again until   starts to flash.

6.3 Setting the DURATION

1. Set an oven function and

temperature.

2. Press   again and again until 

starts to flash.

3. Press   or   to set the DURATION

time.

The display shows 

.

4. When the time ends, 

 flashes and

an acoustic signal sounds. The

appliance deactivates automatically.

5. Press any button to stop the acoustic

signal.

6. Turn the knob for the oven functions

and the knob for the temperature to

the off position.

6.4 Setting the END

1. Set an oven function and

temperature.

2. Press   again and again until 

starts to flash.

3. Press   or   to set the time.
The display shows 

.

4. When the time ends, 

 flashes and

an acoustic signal sounds. Press any

button to stop the signal.

5. Turn the knob for the oven functions

and the knob for the temperature to

the off position.

6. The appliance deactivates

automatically.

6.5 Setting the TIME DELAY

1. Set an oven function and

temperature.

2. Press   again and again until 

starts to flash.

3. Press   or   to set the time for

DURATION.

4. Press  .
5. Press   or   to set the time for

END.

6. Press   to confirm.

Appliance turns on automatically later on,

works for the set DURATION time and

stops at the set END time. At the set time

an acoustic signal sounds.

7. Turn the knob for the oven functions

and the knob for the temperature to

the off position.

8. The appliance deactivates

automatically.

6.6 Setting the MINUTE

MINDER

1. Press   again and again until 

starts to flash.

2. Press   or   to set the necessary

time.

The Minute Minder starts automatically

after 5 seconds.

www.electrolux.com

10