Electrolux EOC 66700, User Manual

To prevent damaging or weakening the door
glass panels avoid the use of the following:
• Household detergents and bleaches
• Impregnated cleaning pads that are un-

suitable for non-stick saucepans

• Brillo/Ajax pads or steel wool pads
• Chemical oven pads or aerosols
• Rust removers
• Bath/Sink stain removers
Clean the outer and inner door glass using
warm soapy water.
Should the inner door glass become heavily
soiled it is recommended that a cleaning
product such as “Hob Brite” is used Do not
use paint scrapers to remove soilage.

Oven Cavity

The enamelled base of the oven cavity is best
cleaned whilst the oven is still warm.
Wipe the oven over with a soft cloth soaked
in warm soapy water after each use. From
time to time it will be necessary to do a more
thorough cleaning, using a proprietary oven
cleaner.

Pyrolytic cleaning

The oven cavity is coated with a special en-
amel resistant to high temperatures.
During the pyrolytic cleaning operation, the
temperature inside the oven can reach about
500°C thus burning food residues.
For your security, during the pyrolytic clean-
ing operation, the oven door automatically
locks when the temperature inside the oven
approaches about 500 °C.
Upon completion of the cleaning operation,
the oven door will be locked until the oven
cavity has cooled down.
The cooling fan operates during cooking until
the oven has cooled down. After cooking, it
is advisable to remove all the food residues
with a wet sponge.
However, from time to time, it will be neces-
sary to do a more complete and thorough
cleaning, using the pyrolytic cleaning func-
tion.
You can select two different levels of pyrolytic
cleaning depending on how dirty the oven is.
If the oven cavity is not very dirty, we recom-
mend that you select the pyrolytic 1 function
(P I) in the programmer display.
It is advisable to wipe the oven over with a
soft sponge soaked in warm water after each
pyrolytic cleaning cycle is carried out.

If the oven cavity is very dirty, we advise you
to select the pyrolytic 2 function (P 2) in the
programmer display.
During the pyrolytic cleaning function, it is not
possible to use the oven for 2 hours when
selecting the Pyr 1 function and up to 2 1/2
hours when the Pyr 2 function is active.

The Pyro reminder recommends that a
pyrolytic cleaning function should be
carried out after several baking and
roasting processes and depending on
dirty the oven is.
An acoustic signal will be heard and the
indication 

Pyro

 is displayed for approx.

15 seconds and then a second acoustic
signal can be heard.
Depending on how dirty the oven is, se-
lect the most suitable pyrolytic cleaning
function.
For as long as no complete cleaning
function is carried out, Pyro reminders
are displayed each time the oven is
switched off.

How to use the pyrolytic cleaning
function

Warning!

Before activating the

pyrolytic cleaning function, remove
any excessive spillage and make
sure that the oven is empty. Do not
leave anything inside it (e.g. pans,
grids, baking tray, drip pan, etc.) as
they could become severely
damaged.

Warning!

Ensure that the oven door

is closed before activating the
pyrolytic cleaning function.

Warning!

When the pyrolytic

cleaning function is on, it is
advisable not to use the hob as this
could cause overheating and
damage the appliance.

Warning!

During the pyrolytic

cleaning cycle the oven door
becomes very hot. Children should
be kept away until it has cooled.

Choose this function to clean the oven by
pyrolysis.
The following pyro levels are available:

electrolux 

 17