Electrolux EPWC1MEUKG, Instruction Manual

10

7. Troubleshooting

Customer Service

If  the  appliance  presents  any  malfunction,  

before  calling  the  Authorized  Service,  check 

below  if  the  cause  of  the  failure  is  not  a  

simple  one  to  solve  or  if  there  is  no  error  in  

the  use  of  the  product,  which  can  easily  and 

quickly  be  corrected,  without  waiting  for  a  

technician.
When  the  suggested  corrections  are  not  suf-

which will be at your disposal.

Faults

Possible Causes

Corrections

Doesn't work / won't turn 

on

Outlet with bad contact.

Correct the fault in the power outlet.

Power failure, circuit breaker 

off or blown fuse.

Wait for the power to return, turn on the 

circuit breaker or change the fuse.

Water with odor and/or 

taste

The product has not been 

used for more than 3 days.

Dispose of approximately 5 liters from 

each tank (ice-cold and natural) before 

consuming the water again.

Odor coming from the 

product's water pipe.

Clean the product as instructed on Pages 

8 and 9.

The appliance indicating the 

Water leakage

Loose pipe connection.

Make sure that the appliance's water pipe 

connections have been properly secured.

Damaged connectors or 

hose.

Please contact the Electrolux Authorized 

Service.

No water comes out

Tap or water supply closed. Open the tap or water supply.

Water pressure is too low.

Make sure the water pressure is above 4 

mca (39 kPa).

Check the UV lamp indicator  Replace the UV lamp

The water doesn’t freeze

Check the installation.

The product must not be embedded, 

placed inside cabinets or places without 

ventilation.

the time indicated in the 

Manual.

Check your hydraulic installation, clean 

the system such as water tanks and pipes, 

or contact your water supply company.

No more water in the cold 

water tank.

The storage capacity of the cold water 

tank is 800 ml. 

The Peltier electronic 

cooling system has a cooling recovery 

time of up to two and a half hours, 

depending on factors such as ambient 

temperature, inlet water temperature and 

frequency of use.

The "Filter replacement" 

indicator does not go off. the product switched off.

switched on.