background image

WE’RE THINKING OF YOU

 Thank you for purchasing an Electrolux barbecue.  
You’ve chosen a product that brings with it decades  
of professional experience and innovation. Ingenious  
and stylish, it has been designed with you in mind.  
So whenever you use it, you can be safe in the  
knowledge that you’ll get great results every time. 
Welcome to Electrolux.

BEFORE USING YOUR APPLIANCE 

Check for any damage or marks. If you find the appliance 
damaged or marked you must report it within 7 days to 
claim for damages under the manufacturers warranty.
 Before you use the appliance, we recommend that you 
read through the whole user manual which provides the 
description of the product and its functions. To avoid 
the risks that are always present when you use a gas 
appliance, it is important that the product is installed 
correctly and that you read the safety instructions carefully 
to avoid misuse and hazards.
 For future reference, please store this booklet in a  
safe place.
This appliance complies with the requirements of 
Australian Standard AS4557.

CONDITIONS OF USE

This appliance is intended to be used in household and 
similar applications such as:
•   Staff kitchen areas in shops, offices and other working 

environments

•  Farm houses
•   By clients in hotels, motels and other residential  

type environments

•  Bed and breakfast type environments.
•  Catering and similar non-retail applications

BEFORE YOU CALL 

Please ensure you read the instruction manual fully before 
you call for service, or a full service fee could be applicable. 

RECORD MODEL AND SERIAL  

NUMBER HERE:

 Model: 

  Serial No: 

CONTENTS

3

 

General warnings

4

 

Electrolux Integrated burner product description 

6

 

Gas specifications

6

 

Gas connection detail

7

 

Universal LPG installation

7

 

Gas bottle safety information

8

 

Natural Gas installation 

10

  Leak test procedure 

11

  Installation warnings

11

  Installation instructions 

13

  Gas requirements 

13

   Locating integrated burner adjacent to  

integrated barbecue 

14

  Connecting with Electrolux integrated barbecue 

15

  Burner operation 

15

  Pivoting lid safety leg

16

  Cleaning and care

16

 Maintenance

17

 Troubleshooting 

17

 Accessories 

19

 Warranty 

SYMBOLS

 WARNING!

This symbol indicates information concerning your  
personal safety.

 CAUTION!

This symbol indicates information on how to avoid 
damaging the appliance.

 

IMPORTANT! 

This symbol indicates tips and information about use 
of the appliance.

 ENVIRONMENT! 

This symbol indicates tips and information about 
economical and ecological use of the appliance.

Summary of Contents for EQBW316AS





















Reviews: