Electrolux ER 7020 D, Instruction Book

4

DESCIPTION OF THE APPLIANCE

G

H

J

C

B

A

I

F

E

D

A

- Ice 

tray

B

-  Shelf for freezing fresh foods

C 

- Frozen food storage

D 

-  Dairy compartment (for dairy products to prevent tainting)

E 

-  Can storage shelf

F 

- Bottle storage shelf

G 

-  Salad crisper (to keep fruit and vegetables fresh)

H 

-  Glass shelf (for storing fresh meat)

I 

-  Cooked foods storage shelves

J 

-  Thermostat control for both compartments

17

Door reversibility

1. Disconnect from the electricity supply;
2. Remove all loose item, including food, store food

in a cool place;

3. Gently lay the fridge/freezer on its back with the

top held away from the floor by 5-8 cm (2-3

inches) of packing;

4. Remove the feet (2-3).
5. Remove bottom hinge (1).
6. Slide out the lower door from middle hinge (H)

and remove the latter.

7. Slide out the upper door from pin (G), unscrew

the latter and then screw it down into the hinge

provided on the opposite side, after having

removed the small plugs (I) which should then be

fitted on the opposite side.

8. Refit the upper door and the middle hinge on the

opposite side.

9. Refit the lower door and bottom hinge (1) on the

opposite side.

10.Refit the feet (2-3)

Attention

After completion of the door reversing operation,

check that the door gasket adheres to the cabinet. If

the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that

case, wait for the natural fitting of the gasket or

accelerate this process by heating up the part

involved with a normal hairdrier.

H

G

D715 PIED/M

1

2

3

I

I

I