3
Electrolux 818 19 23-01/5
Description of the Appliance
GB
Control Panel
A B C D E
F
G
H
A. Alarm shut-off button
Used to turn the audible alarm off.
B. Red warning lamp
Lights if it is too warm inside the cabinet.
C. FAST FREEZE button
Used to switch the Fast Freeze feature on and off.
D. Yellow indicator lamp
Lights when fast Freeze is operating.
E. Green indicator lamp
Lights when the freezer is operating.
F. Thermostat control
Use to switch on and set the desired temperature in
the freezer.
G. Green indicator lamp
Lights when the fridge is operating.
H. Thermostat control
Use to switch on and set the desired temperature in
the fridge.
Before use
GB
Position and clean the cabinet as explained in the
section "Installation".
Check that the drain hose at the rear of the cabinet
discharges into the drip tray.
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 4 hours. Otherwise the
compressor may sustain damage. This
time will allow the oil sufficient time to
return to the compressor.
Using the fridge
GB
To start the fridge and set the
correct temperature
Turn the thermostat control to the desired position.
MIN
The lowest position of the thermostat control
results in the highest temperature inside the cabinet.
MAX
The highest position of the thermostat control
results in the lowest temperature inside the cabinet.
H
:
Switched off.