A1
A
Drill the hinge cover A, as shown in figure.
Apply the covers A and A1 (in the accesso-
ries bag) in to the middle hinge.
1
2
Install the appliance in the niche.
Push the appliance in the direction of the ar-
row (1) until the upper gap cover stops
against the kitchen furniture.
Push the appliance in the direction of the ar-
row (2) against the cupboard on the oppo-
site side of the hinge.
4 mm
44 mm
Adjust the appliance in the niche.
Make sure that the distance between the ap-
pliance and the cupboard front-edge is 44
mm.
The lower hinge cover (in the accessories
bag) makes sure that the distance between
the appliance and the kitchen furniture is
correct.
Make sure that the clearance between the
appliance and the cupboard is 4 mm.
Open the door. Put the lower hinge cover in
position.
42 www.electrolux.com
Summary of Contents for ERN29801
Page 79: ...DEUTSCH 79 ...