Electrolux ERU0943FOW, User Manual

CONTROL PANEL

1

2

3

5

4

1

Pilot light

2

Temperature regulator

3

Fast Freeze light

4

Fast Freeze switch
Acoustic alarm reset switch

5

Alarm light

SWITCHING ON

1.

Insert the plug into the wall socket.

2.

Turn the Temperature regulator clock-
wise to a medium setting.

3.

The Pilot light will light up and a sound
is on only for 2 sec. indicating that the
appliance is powered.

4.

The Alarm light will blink and the sound
signal alarm will get on, indicating that
the temperature inside the appliance is
too high.

5.

Push the Fast Freeze switch and the
sound signal alarm will get off.

6.

Push the Fast Freeze switch once
again and the Fast Freeze light will light
up. The freezer will start to operate.

SWITCHING OFF

1.

To turn off the appliance, turn the
Temperature regulator to the "O" posi-
tion and a sound is on only for 2 sec.

2.

The pilot light will switch off.

TEMPERATURE REGULATION

The temperature within the appliance is
controlled by the Temperature regulator sit-
uated at the bottom of the cabinet.
To operate the appliance, proceed as fol-
lows:

• turn the Temperature regulator toward

lower settings to obtain the minimum
coldness.

• turn the Temperature regulator toward

higher settings to obtain the maximum
coldness.

A medium setting is generally the
most suitable.

However, the exact setting should be
chosen keeping in mind that the tempera-
ture inside the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.

FAST FREEZE FUNCTION

You can activate the Fast Freeze function
by pressing the Fast Freeze switch.
The Fast Freeze light will light up.
It is possible to deactivate the function at
any time by pressing Fast Freeze switch.
The Fast Freeze light will switch off.

EXCESSIVE TEMPERATURE
ALARM

If the temperature inside the freezer has ris-
en to a point where the safe storage of fro-
zen food is no longer ensured (for example
due to an power failure) the Alarm light will
blink and an acoustic alarm will sound.

1.

Switch off the warning tone by press-
ing the Fast Freeze switch.
The Fast Freeze light illuminates.
The Alarm light blinks until the required
temperature has been reached again.

2.

The Fast Freeze switch can be re-
leased as soon as the Alarm light is off.

ENGLISH

7