caution
vertical air flow direction
1. Press the SWING button on the remote control once.
• The horizontal louvre will change its
angle continuously.
2. Press the SWING button again when the horizontal
louvre is at the desired position.
• The louvre will stop moving within the range
shown in the diagram below.
• The adjusted position will be memorised and
will be automatically set to the same position
when the unit is next operated.
Adjusting the airflow direction
COOL and DRY modes
HEAT mode
adjustment range
SWING
CLEAN
FAN
MODE
SET/C
1h
COOL and DRY modes
HEAT mode
adjustment range
SWING
CLEAN
FAN
MODE
SET/C
1h
horizontal air flow direction
Whilst the unit is operating on low fan speed, hold the
vertical louvre as shown in the diagram and adjust the
air flow direction, taking care not to catch fingers on
the moving fan blade.
Never attempt to adjust the horizontal
louvre manually.
• Manual adjustment of the horizontal louvre can
cause the unit to malfunction when the remote
control is used for adjustment.
• When the horizontal louvre is positioned at the
lowest position in the COOL or DRY mode for an
extended period of time, condensation may result.
Do not adjust the vertical louvre to the extreme left
or right in the COOL mode with the fan speed set to
LOW for an extended period of time. Condensation
may form on the louvres.
COOL and DRY modes
HEAT mode
adjustment range
SWING
CLEAN
FAN
MODE
SET/C
1h
1
2
8
electrolux ESD24HRA & ESD30HRA
adjusting the airflow
