Electrolux ESF 46710, User Manual

Rinse aid dispenser activated

4. To change the setting, press button 

B

again, the digital display indicates the
new setting.

5. To memorize the operation, switch off the

dishwasher by pressing the On/Off but-
ton.

If you decide to revert back to the
use of individual detergents we ad-
vise that you:

1. Deactivate the Multitab function.
2. Fill up the salt container and the rinse

aid dispenser again.

3. Adjust the water hardness setting to

the highest setting and perform 1
normal washing programme without
loading any dishes.

4. Adjust the water hardness setting

according to the hardness of the wa-
ter in your area.

5. Adjust the rinse aid dosage.

Select and start a washing programme

Select the washing programme and
delay start with the door slightly
opened. The start of the programme
or the countdown of the delay start
will occur only after the closure of
the door. Until then it is possible to
modify the settings

1. Check that the baskets have been loaded

correctly and that the spray arms are free
to rotate.

2. Check that the water tap is opened.
3. Press the On/Off button. The dishwasher

must be in setting mode.

4. Press the button corresponding to the re-

quired programme (see ''Washing pro-
grammes'' chart).
When a programme has been selected
the corresponding light comes on.
The 

programme in progress

 indicator

light comes on.
Close the dishwasher door, the pro-
gramme starts automatically.
The 

programme in progress

 indicator

light remains on.

Setting and starting the programme with
delay start

1. After having selected the washing pro-

gramme, press the delay start button until
the flashing number of hours for the delay
start appear in the digital display. The
start of the selected washing programme
can be delayed for between 1 and 19
hours.

2. Close the dishwasher door, the count-

down starts automatically. The number in
the display is no longer flashing but fixed
with static light.

3. The countdown will decrease with steps

of 1 hour.

4. The opening of the door will interrupt the

countdown. Close the door; the count-
down will continue from the point at
which it was interrupted.

5. Once the delay start has elapsed the pro-

gramme will start automatically.

With the delay start function set, the

programme in progress

 indicator light

is off. Once the countdown of the delay
start has elapsed, the washing pro-
gramme will start automatically and the

programme in progress

 indicator light

comes on.

The selection of the washing pro-
gramme and delay start can occur also
with the door closed.
When you press a programme button
you have 

ONLY 3 seconds

 to select a

different programme or a delay start.
After these 3 seconds, the selected pro-
gramme starts automatically.

Warning!

Interrupt or cancel a

washing programme in progress
ONLY if it's absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.

Interrupt a washing programme in
progress

• Open the dishwasher door; the pro-

gramme will stop. Close the door; the pro-
gramme will start from the point at which
it was interrupted.

• Press the On/Off, all indicator lights will go

off. Press the On/Off button again; the pro-
gramme will start from the point at which
it was interrupted.

electrolux 

 15