x4
2. Fix laterally the appliance with the
spacers and the screws supplied. Make
sure that the screws are tight.
Once the installation is completed, make
sure that the bottom of the adjustable plinth
is aligned with the ground.
CUSTOM MADE KICK-PANEL
For integrated appliances and full-stainless-
steel door appliances.
We recommend that you make a custom
made kick-panel that aligns your kitchen
cabinets.
A notched continuous panel is necessary to
prevent door swing interference and to
keep kick-panel alignment with adjacent
units.
1. Cut a notch in the kick-panel sufficient
to let the door swing freely under the
appliance (refer to the chart).
2. Make a check for interference. Open
and close the door slowly. If the door
touches the kick-panel, trim to prevent
interference.
3. Attach the kick-panel to adjacent cabi-
nets so that if service is necessary you
can remove it.
electrolux
19
Summary of Contents for ESF 66814
Page 1: ...ESF 66814 EN DISHWASHER USER MANUAL ...
Page 25: ...electrolux 25 ...
Page 26: ...26 electrolux ...
Page 27: ...electrolux 27 ...