background image

5. 

OPTIONS

Activate or deactivate the options
before the start of a program. You
cannot activate or deactivate the
options while a program operates.

If one or more options are set,
make sure that the related indica-
tors are on before the program
starts.

5.1 

TimeSaver

This option increases the pressure and
the temperature of the water. The wash-
ing and drying phases are shorter. The to-
tal program duration decreases by ap-
proximately 50%.
The washing results are the same as with
the normal program duration. The drying
results can decrease.

How to activate the TimeSaver option
1.

Press 

TimeSaver

. The related indica-

tor and the program bar come on. In
the display you can see the update of
the program duration.
• If the option is not applicable to the

program, the related indicator flash-
es quickly 3 times and then goes
off. The program bar does not come
on.

5.2 

EnergySaver

This option decreases the temperature in
the last rinse phase.
The use of this option decreases the ener-
gy consumption (up to 25%) and the pro-
gram duration.
The dishes can be wet at the end of the
program.

How to activate the EnergySaver
option
1.

Press 

EnergySaver

. The related indi-

cator comes on. In the display you can
see the update of the program dura-
tion.
• If the option is not applicable to the

program, the related indicator flash-
es quickly 3 times and then goes
off.

5.3 

Hygiene

With this option you have better hygiene
results. During the rinsing phase, the tem-
perature stays at 70 °C for at least 10 mi-
nutes.

How to activate the Hygiene option
1.

Press 

Option

 until the Hygiene indica-

tor comes on. In the display you can
see the update of the program dura-
tion.
• If the option is not applicable to the

program, the related indicator does
not come on.

5.4 

Multitab

Activate this option only when you use
multi-tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The program duration can increase.

How to activate the Multitab option
1.

Press 

Option

 until the Multitab indica-

tor comes on.

If you stop to use the multi-tablets,
before you start to use separately
detergent, rinse aid and dishwasher
salt, do these steps:
1.

Set the water softener to the highest
level.

2.

Make sure that the salt container and
the rinse aid dispenser are full.

3.

Start the shortest program with a rins-
ing phase, without detergent and with-
out dishes.

4.

Adjust the water softener to the water
hardness in your area.

5.

Adjust the released quantity of rinse
aid.

5.5 

Acoustic signals

The acoustic signals operate when the
appliance has a malfunction. It is not pos-
sible to deactivate these acoustic signals.
There is also an acoustic signal that oper-
ates when the program is completed. By
default, this acoustic signal is off, but it is
possible to activate it.

10 www.electrolux.com

Summary of Contents for ESF 6700ROW

























Reviews: