background image

1. 

  SAFETY INSTRUCTIONS

Before the installation and use of the ap-
pliance, carefully read the supplied in-
structions. The manufacturer is not re-
sponsible if an incorrect installation and
use causes injuries and damages. Always
keep the instructions with the appliance
for future reference.

1.1 

Children and vulnerable

people safety

WARNING!

Risk of suffocation, injury or per-
manent disability.

• Do not let persons, children included,

with reduced physical sensory, reduced
mental functions or lack of experience
and knowledge use the appliance. They
must have supervision or instruction for
the operation of the appliance by a per-
son who is responsible for their safety.

• Do not let children play with the appli-

ance.

• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the

appliance door when it is open.

1.2 

Installation

• Remove all the packaging.
• Do not install or use a damaged appli-

ance.

• Do not install or use the appliance

where the temperature is less than 0
°C.

• Do not drill into the sides of the appli-

ance otherwise damage to hydraulic
and electrical components may occur.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• The appliance must be earthed.
• Make sure that the electrical information

on the rating plate agrees with the pow-
er supply. If not, contact an electrician.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-plug adapters and ex-

tension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.
Should the mains cable need to be re-
placed, this must be carried out by our
Service centre.

• Connect the mains plug to the mains

socket only at the end of the installa-
tion. Make sure that there is access to
the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the
mains plug.

• Do not touch the mains cable or the

mains plug with wet hands.

• Test the appliance. Run a quick wash-

ing program and ensure that the appli-
ance fills with water, washes and drains
with no leaks.

Water connection

• Make sure not to cause damage to the

water hoses.

• Before you connect the appliance to

new pipes or pipes not used for a long
time, let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

• The water inlet hose has a safety valve

and a sheath with an inner mains cable.

WARNING!

Dangerous voltage.

• If the water inlet hose is damaged, im-

mediately disconnect the mains plug
from the mains socket. Contact the
Service to replace the water inlet hose.

ENGLISH

3

Summary of Contents for ESF 6700ROW

























Reviews: