background image

You can only save 1 programme. A new

setting cancels the previous one.

How to save the MyFavourite

programme

1.

Set the programme that you want to

save

You can also set applicable options

together with the programme.

2.

Press and hold simultaneously 

Program

 and 

Delay

 until the

indicators of the programme and the

options flash for a few seconds.

How to set the MyFavourite

programme

Press and hold 

Program

 until the

indicators that are related to the

MyFavourite programme and options

come on.

The display shows the duration of the

programme.

7. 

OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate or

deactivate options while a

programme is running.

Not all options are compatible

with each other. If you have

selected non compatible

options, the appliance will

automatically deactivate one

or more of them. Only the

indicators of the options still

active will stay on.

7.1 

Multitab

Activate this option when you use multi-

tablets that integrate the salt, rinse aid and

detergent functions. They can also contain

other cleaning or rinsing agents.
This option deactivates the release of salt.

The salt indicator does not come on.
This option also deactivates the release of

rinse aid but only when the rinse aid

dispenser is deactivated, (rinse aid

indicator does not come on). If the rinse

aid dispenser is activated, rinse aid is

released even with the option Multitab

activated.
With the use of this option the programme

duration is prolonged to increase the

cleaning and drying results with the use of

multi-tablets.
Multitab is not a permanent option and

must be selected at every cycle.

How to activate Multitab

Press 

Option

 until the indicator   comes

on.

7.2 

TimeManager

This option increases the pressure and the

temperature of the water. The washing

and the drying phases are shorter.
The total programme duration decreases

by approximately 50%.
The washing results are the same as with

the normal programme duration. The

drying results can decrease.

How to activate TimeManager

Press 

Option

 until the indicator 

 comes

on.

If the option is not applicable to the

programme, the related indicator does not

come on or it flashes quickly for a few

seconds and then goes off.

The display shows the updated

programme duration.

ENGLISH

11

Summary of Contents for ESF 7530ROW

























Reviews: