background image

Programme 

1)

Water

(l)

Energy

(kWh)

Duration

(min)

7 - 14

0.6 - 1.4

40 - 150

14 - 16

1.2 - 1.5

139 - 149

12.5 - 14.5

1.4 - 1.6

154 - 164

12 - 14

0.7 - 0.9

75 - 85

10

0.9

30

1) 

The pressure and the temperature of the water, the variations of the mains supply, the op-

tions and the quantity of dishes can change the values.

5.2 

Information for test institutes

For all the necessary information for test

performance, send an email to:

info.test@dishwasher-production.com

Write down the product number (PNC)

that is on the rating plate.

6. 

SETTINGS

6.1 

Programme selection mode

and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

In user mode, the following settings

can be changed:

• The level of the water softener

according to the water hardness.

• The activation or the deactivation of the

acoustic signal for end of programme.

• The activation or deactivation of the

rinse aid dispenser when you want to

use the Multitab option without rinse

aid.

• The level of rinse aid according to the

required dosage.

These settings will be saved until you

change them again.

How to set the programme

selection mode

The appliance is in programme selection

mode when the programme indicator

 is on and the display shows the

programme duration.
When you activate the appliance, usually it

is in programme selection mode.

However, if this does not happen, you can

set the programme selection mode in the

following way:
Press and hold simultaneously 

Program

and 

Option

 until the appliance is in

programme selection mode.

6.2 

The water softener

The water softener removes minerals from

the water supply, which would have a

detrimental effect on the washing results

and on the appliance.
The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.
The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water in

your area. It is important to set the right

level of the water softener to assure good

washing results.

www.electrolux.com

8

Summary of Contents for ESF 7530ROW

























Reviews: