The upper basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates of up to 24 cm in
diameter), salad bowls, cups and glasses; Glasses
with long stems can be placed upside down in the
raised cup racks.
Larger plates (dinner plates up to 24 cm in
diameter) must be loaded in the front part of the
upper basket.
Light items (plastic bowls etc.) should be loaded in
the upper basket and arranged so they do not
move.
When loading the dishes, ensure that you
do not cover the water inlet funnel in the
middle of the upper basket.
Before closing the door, ensure that the
spray arms can rotate freely.
Adjusting the height of the upper
basket
If washing very large plates (over 27 cm and up to
31 cm in diameter) you can load them in the lower
basket after moving the upper basket.
To move to the higher position proceed as
follows:
1.
Move the front runner stops (A) of the upper
basket outward and slide the basket out.
2.
Refit the basket in the higher position and
replace the stops (A) in their original position.
When the top basket is in the higher position
it will only take plates up to 20 cm in diameter
and you will not be able to use the raised cup
racks.
After loading your machine always close
the door, as an open door can be a
hazard.
11
PBA21GB
IEC 436 / DIN 44990
US21
US20
A
RC01
US16
US16
Summary of Contents for ESF473
Page 23: ......