background image

9

The cutlery basket

Long bladed knives stored in an upright position are a
potential hazard.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as
knives.

Removable knife basket

Long and/or sharp items of cutlery such as carving knives must
be placed horizontally in the removable knife basket, which is
positioned at the rear of the upper basket.

Cutlery should be placed in the removable cutlery basket with
the handles facing downwards. If the handles protrude from
the bottom of the basket, obstructing the lower spray arm, load
the cutlery with the handles facing upwards.

Mix spoons with other cutlery to prevent them from sticking
together.

The cutlery basket can be
placed either to the left or to
the right of the lower basket.

The upper basket 

The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 25 cm in diameter), salad
bowls, cups and glasses. 
Arrange items on and
underneath the cup racks so
that water can reach all
surfaces. 
Glasses with long stems can
be placed upside down in
the cup racks.
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move. 

In case that plates are loaded in the upper
basket:

load them starting from the
rear positions of the
basket; tilting them slightly
forwards and avoiding the
front positions near the
door.

Before closing the door, ensure that the spray arms can
rotate freely. 

Adjusting the height of the upper basket 

If washing very large plates you can load them in the lower
basket after moving the upper basket to the higher position. 

To move to the higher position proceed as
follows:

1. Move the front runner stops (A) of the upper basket 

outwards and slide the basket out. 

2. Refit the basket in the higher position and replace the stops 

(A) in their original position. 

After loading your machine always close the door, as an
open door can be a hazard.

US46

US71

UI42

RC01

With upper basket raised

20 cm

31 cm

With upper basket lowered

25 cm

27 cm

Maximum height of the dishes in

upper basket

lower basket

UI53

Summary of Contents for ESF6121





















Reviews: