US47
11
The upper basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates of up to 24 cm in
diameter), salad bowls, cups and glasses.
Arrange items on and underneath the cup racks so
that water can reach all surfaces.
Glasses with long stems can be placed upside down
in the cup racks.
Light items (plastic bowls etc.) should be loaded in
the upper basket and arranged so they do not move.
In case that plates are loaded in the upper
basket:
load them starting from the rear positions of
the basket, tilting them slightly forwards and
avoiding the front positions near the door.
Before closing the door, ensure that the
spray arms can rotate freely.
Adjusting the height of the upper
basket
If washing very large plates (over 27 cm and up to
32 cm in diameter) you can load them in the lower
basket after moving the upper basket to the higher
position.
To move to the higher position proceed as
follows:
1. Move the front runner stop (A) of the upper basket
outwards and slide the basket out.
2. Refit the basket in the higher position and replace
the stops (A) in their original position.
When the top basket is in the higher
position it will only take plates up to 20 cm
in diameter and you will not be able to use
the raised cup racks.
After loading your machine always close
the door, as an open door can be a hazard.
A
RC01
US71
