background image

14

Internal cleaning

Ensure that the seals around the door, the detergent
and rinse aid dispensers are cleaned regularly with a
damp cloth.

We recommend every 3 months to run a 65°C wash
programme without dishes using detergent.

Cleaning the central filter

(After each wash)

Scraps of food may accumulate in the drain filter (A)
and should be removed by rinsing the filter under
running water.

To remove the drain filter

- simply pull it out by the handle.

Once cleaned, refit the filter by pushing it back to its
original position until it engages.

Cleaning the large filter

(Every month)

If necessary clean the large filter (B) on both sides
under running water, using a brush.

To remove the large filter

1. Remove the spray arm by pulling it upwards on one 

side.

2. Turn the column (C) anticlockwise by 90° and then 

slide out the filter.

3. Once cleaned refit it following the above instructions

in reverse order.

4. Ensure the filter is in its original position, the handle 

of the drain filter should be pointing towards the 
front of the appliance.

The dishwasher must not be used without 
filters.
Incorrect repositioning and fitting of the 
filters will produce poor washing results.
Cleaning the filters is vital to ensure correct 
operation of the machine.

MAN01en

Maintenance and cleaning

A

MA04

MA19

C

90

°

B

MA05

MA20

MA21

MA18

Summary of Contents for ESF673























Reviews: