5
Ironing Chart
Note:
Always start ironing the fabrics that require low ironing temperature setting, and then increase the temperature setting for
fabrics which require higher temperature.
Fabric
Temperature setting
Ironing recommendation
Acrylic
•
Dry iron on reverse side.
Acetate
•
Dry iron on reverse side while still damp
or use spray to dampen.
Nylon & Polyester
•
Iron on reverse side while still damp or
use spray to dampen.
Rayon
•
Iron on reverse side of fabric.
Viscose
•
Iron on reverse side of fabric.
Silk
••
Iron on reverse. Use an ironing cloth to
prevent shine marks.
Cotton blends
••
Check label and follow manufacturer’s
instructions. Use setting for the fibre
requiring lowest setting.
Wool & wool blends
••
Steam iron on reverse side or use ironing
cloth.
Cotton
••
Steam iron on reverse side.
Corduroy
•••
Steam iron on reverse side or use ironing
cloth.
Linen
••• to “max”
Iron on reverse side or use ironing cloth
to prevent shine marks, especially with
dark colours.
Denim
••• to “max”
Use steam boost if needed.
Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in the table.
UltraSteam
™
Precision is fitted with an auto-steam system which adjusts automatically the steam output and ensures you always get
the ideal amount of steam according to the temperature selected.
Please note:
When set on the • program, the iron will not produce steam. The iron heats up faster than it cools down.
