Electrolux ESI 6105, Instruction Book

Programme selector dial and On/Off indicator
light:

the selection of a washing programme occurs by

turning the programme selector dial clockwise or anticlockwise,
until the desired washing programme (see "Washing
programmes" chart) corresponds with the programme selection
marker placed on the dial (position On). The On/Off indicator
light illuminates.
The indicator lights of the phases foreseen for the selected
programme start flashing.

To switch off the machine turn the programme selector dial
until the marker on the dial corresponds with the On/Off
indicator light (position Off). The On/Off indicator light turns off.

With the programme selector dial it is also possible to set the
level of the water softener (see specific paragraph).

"Delay start" button:

this option allows the start of the

programme to be delayed by 3 hours; the corresponding
indicator light illuminates.

"Start/cancel" button:

once a washing programme has

been set, press this button to start the programme.

The start/cancel indicator light (placed above the button)
illuminates.

With this button it is possible to cancel a washing programme
in progress.

Indicator lights:

have the following meanings:

As soon as you select a washing programme, the phase
indicator lights for that programme will start flashing.

As the programme starts, the phase indicator lights turn off
except for the indicator light of the phase in progress which will
remain lit with a static light.

The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary. 

The control panel

5

Programme selector dial

Indicator lights

Door handle

On/Off indicator light

Start/cancel indicator light

Programme selection marker

Programme guide

Start/cancel button

Delay start button

Salt: refilling indicator light: illuminates when the 
salt has run out.

Rinse aid: refilling indicator light: illuminates when 
the rinse aid has run out.

Wash: illuminates when the washing and rinsing 
phases are running.

Dry: illuminates when the drying phase is 
running.

End of cycle: illuminates when the washing 
programme has ended.

It also has added functions of visual signalling 
as:

- the setting of the water softener,

- intervention of an alarm due to the malfunction 

of the machine.