Electrolux ESI 6700RAX, User Manual

5. 

OPTIONS

Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.

If one or more options are set,
make sure that the related indica-
tors are on before the programme
starts.

5.1 

MyFavourite

With this option you can set and save the
programme that you use more frequently.

You can only save 1 programme
at a time. A new setting cancels
the previous one.

How to save a programme
1.

Press the on/off button to activate the
appliance.

2.

Set the programme that you want to
save. You can also set applicable op-
tions together with the programme. It
is not possible to save the options
Multitab and Delay.

3.

Press and hold 

MyFavourite

 until the

programme bar flashes quickly.

How to set the MyFavourite
programme
1.

Press 

MyFavourite

. The indicators

that are related to the MyFavourite
programme and options come on
• The display shows the duration of

the programme.

5.2 

TimeSaver

This option increases the pressure and
the temperature of the water. The wash-
ing and drying phases are shorter. The to-
tal programme duration decreases by ap-
proximately 50%.
The washing results are the same as with
the normal programme duration. The dry-
ing results can decrease.

How to activate the TimeSaver option
1.

Press 

TimeSaver

. The related indica-

tor and the programme bar come on.
In the display you can see the update
of the programme duration.

• If the option is not applicable to the

programme, the related indicator
flashes quickly 3 times and then
goes off. The programme bar does
not come on.

5.3 

XtraPower

This option increases the water pressure
in the prewash and washing phases by
40%. The washing results are very good
also with heavy soiled loads.

How to activate the XtraPower option
1.

Press 

Option

 until the XtraPower indi-

cator comes on. In the display you can
see the update of the programme du-
ration.
• If the option is not applicable to the

programme, the related indicator
does not come on.

5.4 

Multitab

Activate this option only when you use the
combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.

How to activate the Multitab option
1.

Press the on/off button to activate the
appliance.

2.

Press 

Option

 until the Multitab indica-

tor comes on.

The option stays on until you deactivate it.
Press 

Option

 until the Multitab indicator

goes off.

If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1.

Deactivate the Multitab option.

2.

Set the water softener to the highest
level.

3.

Make sure that the salt container and
the rinse aid dispenser are full.

4.

Start the shortest programme with a
rinsing phase, without detergent and
without dishes.

5.

Adjust the water softener to the water
hardness in your area.

ENGLISH

9