Electrolux ESI 8710RAX, User Manual

2.

Put the detergent, in powder or

tablets, in the compartment (

B

).

3.

If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4.

Close the lid. Make sure that the lid

locks into position.

9.2 

Setting and starting a

programme

The Auto Off function

This function decreases energy

consumption by deactivating automatically

the appliance when it is not operating.
The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1.

Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

2.

Press 

Program

 again and again until

the indicator of the programme you

want to select comes on.

• If you want to select the

MyFavourite programme, press 

MyFavourite

.

• The display shows the programme

duration.

• The door indicator is on.

3.

Set the applicable options.

4.

Close the appliance door.

5.

Press 

Start

 to start the programme.

Only the programme bar and the

programme duration are visible in the

display

If you want to see the programme

settings, press any button except for the

on/off button. The indicators of the

running programme and options come on

for a few seconds.

Starting a programme with delay

start

1.

Set a programme.

2.

Press 

Delay

 again and again until the

display shows the delay time you want

to set (from 1 to 24 hours).

Only the delay time is visible in the display.

3.

Close the appliance door.

4.

Press 

Start

 to start the countdown.

• The delay indicator comes on.

• The countdown starts to decrease

with steps of 1 hour. Only the last

hour will decrease with steps of 1

minute.

If you want to see the

programme settings, press

any button except for the

on/off button. The indicators

of the programme and

options come on for a few

seconds.

When the countdown is completed, the

programme starts.

Opening the door while the

appliance operates

If you open the door while a programme is

running, the appliance stops. It may affect

the energy consumption and the

programme duration. When you close the

door, the appliance continues from the

point of interruption.

If the door is opened for more

than 30 seconds during the

drying phase, the running

programme will end.

Cancelling the delay start while

the countdown operates

When you cancel the delay start you have

to set the programme and options again.

1.

Open the appliance door.

2.

Press and hold 

Reset

 until the

appliance is in programme selection

mode.

www.electrolux.com

16