6.3
Filling the rinse aid dispenser
A
B
D
C
M AX
1
2
3
4
+
-
A
B
D
C
1.
Press the release button (
D
) to open
the lid (
C
).
2.
Fill the rinse aid dispenser (
A
), no
more than the mark 'max'.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.
Close the lid. Make sure that the re-
lease button locks into position.
You can turn the selector of the
released quantity (
B
) between po-
sition 1 (lowest quantity) and posi-
tion 4 or 6 (highest quantity).
7.
DAILY USE
1.
Open the water tap.
2.
Press the on/off button to activate the
appliance.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent.
5.
Set and start the correct programme
for the type of load and the degree of
soil.
28 www.electrolux.com
Downloaded from www.vandenborre.be
