background image

Check if it’s necessary to refill with special salt or rinse aid

Load cutlery and dishes into the dishwasher.

Fill with dishwasher detergent .

Select a wash programme suitable for the cutlery and 
dishes.

Start the wash programme.

Loading cutlery and dishes

Sponges, household cloths and any object that can
absorb water may not be washed in the dishwasher.

Before loading the dishes, you should:

- Remove large left-overs.
- Soften remnants of burnt food in pans

When loading the dishes and cutlery, please note:

- Dishes and cutlery must not impede the rotation of the 

spray arms .

- Load hollow items such as cups, glasses, pans, etc. with 

the opening downwards so that water cannot collect in the 
container or a deep base.

- Dishes and items of cutlery must not lie inside one 

another, or cover each other.

- To avoid damage to glasses, they must not touch.
- Lay small objects in the cutlery basket.

Plastic items and pans with teflon have a tendency to 
retain water drops; these items will not dry as well as 
porcelain and steel items.

Open the door and slide out the baskets to load the dishes.

The lower basket

The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the spray arms can turn
freely.

The two rear rows of prongs on the lower basket can be easily
lowered to allow you to load pots, pans and bowls.

To lower the prongs:

Slightly pull them upward and let them drop down (see 
picture). 

To bring them back to the standing position, just pull them up 
again. 

In daily use

11

For washing in the dishwasher the following cutlery/dishes

are of limited suitability:

- Only wash stoneware in the dishwasher if it is specifically 

marked as being dishwasher-safe by the manufacturer.

- Glazed patterns may fade if machine washed frequently

- Silver and aluminium parts have a tendency to discolour 

during washing. Left-overs, e.g. egg white, egg yolk and 
mustard often cause discolouring and staining on silver. 
Therefore always clean left-overs from silver immediately, if 
it is not to be washed straight after use.

- Some types of glass can become dull after a large number 

of washes 

are not suitable:

- Cutlery with wooden, horn, china or 

mother-of-pearl handles

- Plastic items that are not heat resistant

- Older cutlery with glued parts that is not 

temperature resistant

- Bonded cutlery items or dishes

- Pewter or copper items

- Lead crystal glass

- Steel items subject to rusting

- Wooden platters

- Items made from synthetic fibres 

UI95

UI43

UI44

Summary of Contents for ESL 6125






















Reviews: