Electrolux ESL 6185, Instruction Book

MENU

SUBMENU

3 -IN- 1

Sets the dishwasher for the use of conventional, concentrated detergents or combi detergents 
(3in1).

- YES

function activated; allows the use of the 3in1 combi detergents,which incorporate detergent, 
rinse aid and salt functions. The symbol 

appears in the display.

With the activation of this function, the rinse aid dispenser and salt container are automatically 
deactivated and consequently also the display indications for the refilling of salt and rinse aid 
are deactivated.

- NO

- for conventional, alkaline detergents with caustic components,
- for low alkaline concentrated detergents with natural enzymes.

RINSE AID

Allows you to deactivate or activate the dosage of rinse aid:
- YES rinse aid dosage activated,
- NO rinse aid dosage deactivated.

WATER HARDNESS

Allows you to set electronically the water softener according to the hardness of the local area 
water: water hardness is measured in 10 levels.

LANGUAGE ENGLISH

Allowsyou to view messages that appear in the display in the required language. 
(Factory setting: english).

SOUND VOLUME

Allows you to adjust the volume of the alarm signals and of the end of programme signal (from 0 
to 5).

Level 0 means the deactivation of the volume of all signals and the symbol 

appears in the 

display.

BRIGHTNESS

Allows you to increase or decrease the brightness of the background of the display, 10 different 
levels can be selected.

28

Option selection button: 

allows you to enter a menu of

options with relative submenu.

How to set the several options:

1. Press more times the option selection button, until the 

desired option is displayed.

2. To modify the current setting of the option press the 

confirm/start button.

3. Press more times the option selection button until the 

selection of the desired submenu is displayed.

4. Press again the confirm/start button: the option is 

memorised. 

To exit from menu, press simultaneously both confirm/start
and option selection buttons.

The options can be set only before the start of a washing
programme.

Once set, these options will remain activated also for the
following cycles, until they will be deactivated.