background image

– Bed and breakfast type environ-

ments.

WARNING!

Risk of injury, burns, electrical
shock or fire.

• Do not change the specification of this

appliance.

• Put knives and cutlery with sharp points

in the cutlery basket with the points
down or in a horizontal position.

• Do not keep the appliance door open

without supervision to prevent to fall on
it.

• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous.

Obey the safety instructions on the de-
tergent packaging.

• Do not drink and play with the water in

the appliance.

• Do not remove the dishes from the ap-

pliance until the programme is comple-

ted. There can be detergent on the
dishes.

• The appliance can release hot steam if

you open the door while a programme
operates.

• Do not put flammable products or items

that are wet with flammable products
in, near or on the appliance.

• Do not use water spray and steam to

clean the appliance.

1.4 

Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.
• Remove the door catch to prevent chil-

dren and pets to get closed in the ap-
pliance.

2. 

PRODUCT DESCRIPTION

1 2

3

4

7

9

5

6

11

10

1

Upper spray arm

2

Lower spray arm

3

Filters

4

Rating plate

5

Salt container

6

Water hardness dial

7

Rinse aid dispenser

8

Detergent dispenser

4

www.electrolux.com

Summary of Contents for ESL 65070R

















Reviews: