background image

Pro-
gramme

1)

Degree of
soil
Type of load

Programme
phases

Dura-
tion
(min)

Energy
(kWh)

Water
(l)

Heavy soil
Crockery, cut-
lery, pots and
pans

Prewash
Wash 70 °C
Rinses
Dry

130 -
150

1.4 - 1.7

15 - 17

 

3)

Fresh soil
Crockery and
cutlery

Wash 60 °C
Rinse

30

0.9

9

ECO

 

4)

Normal soil
Crockery and
cutlery

Prewash
Wash 50 °C
Rinses
Dry

150 -
160

1.0 - 1.1

10 - 11

Normal or light
soil
Delicate
crockery and
glassware

Wash 45 °C
Rinses
Dry

70 - 80

0.9 - 1.0

12 - 13

1) 

The pressure and the temperature of the water , the variations of the mains supply, the

options and the quantity of dishes can change the programme duration and the
consumption values.

2) 

The appliance senses the degree of soil and the quantity of items in the baskets. It

automatically adjusts the temperature and quantity of the water, the energy consumption
and the programme duration.

3) 

With this programme you can wash a load with fresh soil. It gives good washing results in a

short time.

4) 

With this programme you have the most efficient use of water and energy consumption for

crockery and cutlery with normal soil. (This is the standard programme for test institutes).

Information for test institutes

For all the necessary information for test performance. send an email to:

info.test@dishwasher-production.com

Write down the product number (PNC) that is on the rating plate.

5. 

OPTIONS

5.1 

Multitab

Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The salt indicator stays off.
The programme duration can increase.

1.

Press the on/off button to activate the
appliance.

2.

Make sure that the appliance is in set-
ting mode, refer to ‘Setting and start-
ing a programme'.

3.

Press and hold function buttons (

D

)

and (

E

) at the same time until the mul-

titab indicator comes on.

If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1.

Set the water softener to the highest
level.

6

www.electrolux.com

Summary of Contents for ESL 65070R

















Reviews: