Electrolux ESL5321LO, User Manual

7. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

Not all options are

compatible with each other.

If you select non compatible

options, the appliance

automatically deactivates

one or more of them. Only

the indicators of the still

active options are on.

7.1 XtraDry

Activate this option to boost the drying

performance. With XtraDry on, the

duration of some programmes, water

consumption and the last rinse

temperature can be affected.
XtraDry is a permanent option for all
programmes other than 

 and

need not to be selected at every cycle.

In the other programmes the setting of

XtraDry is permanent and it is

automatically used in next cycles. This

configuration can be changed at any

time.

Every time 

 is

activated, XtraDry is off and

needs to be chosen

manually.

How to activate XtraDry

Press simultaneously 

 and 

 until

the indicator 

 comes on.

If the option is not applicable to the

programme, the related indicator does

not come on or it flashes quickly for a few

seconds and then goes off.

8. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

After starting a programme, it may take

up to 5 minutes for the appliance to

recharge the resin in the water softener.

It seems that the appliance is not

working. The washing phase starts only

after this procedure is completed. The

procedure is repeated periodically.

8.1 The salt container

CAUTION!

Use rough salt designed for

dishwashers only. Fine salt

increases the risk of

corrosion.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt

container (only for the first time).

3. Fill the salt container with 1 kg of salt

(until it is full).

ENGLISH

11