8.2
How to fill the rinse aid
dispenser
A
B
D
C
M
AX
1
2
3
4
+
-
A
B
D
C
CAUTION!
Only use rinse aid specifically
designed for dishwashers.
1.
Press the release button (
D
) to open
the lid (
C
).
2.
Pour the rinse aid in the dispenser (
A
)
until the liquid reaches the fill level
'max'.
3.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
4.
Close the lid. Make sure that the
release button locks into position.
You can turn the selector of
the released quantity (
B
)
between position 1 (lowest
quantity) and position 4 or 6
(highest quantity).
9.
DAILY USE
1.
Open the water tap.
2.
Press the on/off button to activate the
appliance.
Make sure that the appliance is in
programme selection mode.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
3.
Load the baskets.
4.
Add the detergent. If you use multi-
tablets, activate the option Multitab.
5.
Set and start the correct programme
for the type of load and the degree of
soil.
9.1
Using the detergent
30
20
A
B
D
C
www.electrolux.com
32
