background image

The water pressure must be in the limits

indicated in the chapter ''TECHNICAL

INFORMATION''. Make sure that the

local water authority gives you the

average mains pressure in your area.
In order to pass the safety valve through

the kitchen cabinets, an opening of at

least 45 mm x 90 mm is needed.

14.3 Water drain hose

The highest point of the drain hose must

be no more than 600 mm from the floor

and must have a continuous fall to the

plumbing connection.
The drain hose can be lengthened using

additional lengths and connectors. These

must be purchased from Electrolux

Spare Parts. The extension length must

not exceed 2 metres.
The drain hose must be free of

obstructions.
Remove the sink plug when the

appliance drains the water to prevent

that the water goes back into the

appliance.
The appliance has a security feature to

prevent dirty water going back into the

appliance. If the spigot of the sink has a

non-return valve, this valve can cause

the appliance to drain incorrectly. remove

the non-return valve.
If you connect the water drain hose to a

trap spigot under the sink, remove the

plastic membrane. If you do not remove

the membrane, remaining food can

cause a blockage in the drain hose

spigot.

Remove

entire

internal

membrane

ENGLISH

23

Summary of Contents for ESL8530RO



























Reviews: