background image

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is complete, the

display shows 0:00.
All buttons are inactive except for the

on/off button.
1. Press the on/off button or wait for the

Auto Off function to automatically

deactivate the appliance.

If you open the door before the

activation of Auto Off, the appliance

is automatically deactivated.

2. Close the water tap.

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.
The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

10. HINTS AND TIPS

10.1 General

Follow the hints below to ensure optimal

cleaning and drying results in daily use

and to help you protect the environment.
• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand.

When needed, select a programme

with a prewash phase.

• Always use the whole space of the

baskets.

• Make sure that items in the baskets

do not touch or cover each other.

Only then can the water completely

reach and wash the dishes.

• You can use dishwasher detergent,

rinse aid and salt separately or you

can use the multi-tablets (e.g. ''All in

1''). Follow the instructions on the

packaging.

• Select a programme according to the

type of load and the degree of soil.

 offers the most efficient use

of water and energy consumption.

10.2 Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

for dishwasher. Other products can

cause damage to the appliance.

• In areas with hard and very hard

water we recommend to use plain

dishwasher detergent (powder, gel,

tablets containing no additional

agents), rinse aid and salt separately

for optimal cleaning and drying

results.

• At least once a month run the

appliance with the use of appliance

cleaner which is particularly suitable

for this purpose.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

detergent residues on the tableware,

we recommend that you use the

tablets with long programmes.

• Do not use more than the correct

quantity of detergent. Refer to the

instructions on the detergent

packaging.

10.3 What to do if you want to

stop using multi-tablets

Before you start to use separately

detergent, salt and rinse aid, complete

the following steps:
1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

www.electrolux.com

16

Summary of Contents for ESL8550RA





























Reviews: