13
ENGLISH
Advanced Functions Operations
2
3
4
5
8
9
6
7
1
1.
°C/°F switch function
°C/°F can be switched by pressing and
Mode buttons at the same time for 3 seconds.
2.
Turbo function
Press the Turbo button to enable or disable
the turbo function. The Turbo function makes
the unit work extra hard to reach your set
temperature in the shortest time as soon as
possible. When you need fast cool or heat,
you can choose this function.
3.
I Feel function
When you press the I Feel button, the I Feel
function will be activated, the remote controller
works as a remote thermostat, providing an
accurate temperature control and maximum
comfort. The remote controller sends the
temperature information at its location to the
indoor unit. The air conditioner will quit I Feel
operation if no temperature information is
received from the remote controller.
4.
I Clean function
Press the I clean button to activate the I Clean
feature, when this function is activated, firstly
the indoor unit operates in cooling mode with
low fan speed for serveral minutes. After that
the unit turns to heating operation with low
fan speed, which dry the inside of indoor unit.
If cooling only model, it will operate as fan
mode. Finally it turns to fan-only mode and
blows away the rest wet air in serveral
minutes. The whole process keep the internal
side of indoor unit dry and prevents the
breeding of bacteria.
It was useless if press the button in power on
mode. Only in power off mode, the remote
controller can send code.
If you press two time, it will cancel the function
immediately.
